This is a special cleaner for the parts made of transparent resin such as headlights, winkers or tail lamps. 2 kinds of liquid are included; "Base Cleaner", which cleans foggy or yellowed headlights or so on, and "Hard Top Coat", which prevents deterioration by UV rays or dirt as the same time as creates gloss. High transparency lasts for a long period and the entire process takes only 2 steps; 'polish' and 'spread'. A special sponge and a cloth are included.

Directions to use

* Remove dirt in advance.

1. Shake the bottle of "Base Cleaner" and put the liquid on the included cloth. Make sure the dirt on the parts are fading away when polishing.

2. Wipe it off with the clean side of the cloth

3. Shake the bottle of "Hard Top Coat", put the liquid on the included sponge and then spread it evenly.

4. Spread it evenly again to fade unevenness with the opposite side of the sponge after drying for about 1 minute.

* The coating film takes 3-4 days to harden completely. Do not touch or wet the car for 24 hours after applying.