Simply apply the wiper rubber to eliminate uncomfortable bibing.
POINT Easy to eliminate uncomfortable bibing.
Simply apply the wiper rubber surface with a fluorine coating. Reduces bibability and streaking.
Cannot be used with water repellent wipers as it will lose its water repellency.
How to Use:
STEP1
Remove blade from wiper arm.
STEP2
Clean dirt and dust on wiper rubber surface and dry well.
STEP3
Shake the bottle well and remove the liquid from the brush that comes with the cap and apply a thin coat on both sides of the wiper rubber.
Please be careful not to apply too much.
STEP4
Wipe 2-3 times with a soft, dry cloth that is clean and dry.
STEP5
Let the wiper dry for 30 minutes or more.
Please use the wiper after more than 2 hours.
If the effect is weak at once, please repeat the process.
Depending on the type of wiper rubber or the degree of deterioration, the effect may not be effective.
